GessoTrim Mouldings

LGO_GESSO_TRIM_WEB

GessoTrim Mouldings

 

GessoTrim is manufactured from 100% sustainable New Zealand radiata pine. The timber is milled, dried and then docked to remove all defects and knots. The timber is finger jointed to produce a quality timber moulding finished with two coats of gesso, and a single coat of acrylic primer for the ultimate smooth fnish. 

IMG-Gessotrim

Features & Benefits

 
ICN-Defect-Free

DEFECT FREE PINE
A premium grade
FJ New Zealand Pine  


 

ICN-Finger-Jointed FINGER JOINTED
Enhanced strength
and stability

 

ICN-Preprimed PREPRIMED
Painted with acrylic
primer ready for installation

 

ICN-Sustainable SUSTAINABLE
Environmentally responsible
FSC certified pine

 

ICN-Cost-Effective

COST EFFECTIVE
Quality range at
a great price

 

ICN-Gesso GESSO
Two coats of gesso for
a smooth silk finish

 

ICN-Interior INTERIOR RANGE
A full range of  the most
popular interior profiles

 

GessoTrim Profiles

 

PRIMED FJ RANGE
5.4m length

3D-Bevelled-Cornice

BEVELLED CORNICE
30mm    40mm

3D-Scotia

SCOTIA
28mm   35mm
 

3D-Quadrant

QUADRANT
12mm    18mm

3D-External-Angle

EXTERNAL ANGLE
16mm    22mm

3D-Door-Stop

DOOR STOP PR
30x10mm

3D-Bullnose

BULLNOSE
60x10mm    90x10mm
60x18mm    90x18mm

3D-Bevelled-Arch

BEVELLED ARCH
40x10mm    60x10mm    90x10mm
40x18mm    60x18mm    90x18mm

3D-Government

GOVERNMENT ARCH
60x18mm    90x18mm

3D-Splayed-Square-Top

SPLAYED SQUARE TOP  
60X18mm 90x18mm
135x18mm  

 

3D-D4S

D4S
20x10mm   30x10mm   40x10mm
60x10mm   90x10mm   12x12mm
18x18mm   24x24mm   40x18mm
135x10mm

Installation Tips

- 10mm thick use 40-50mm finishing brads
- 18mm thick use 50-60mm finishing brads
- Mitre cuts should be used and the join must be glued using PVA
- Do not nail within 20mm of the end of the profile as splitting may occur