Our highest quality grade which is ideally suited for uses where a long length clear is required. Due to its light colour and clean appearance, Craigpine Clears grade requires a minimum of processing to achieve an excellent finish. #1 clears are knot free on two faces and two edges.
Width: 75/100/150/200
Thickness: 25/32/38/50
Length: 1.8 - 6.0m (30cm increments) 2 lengths per pack
Craigpine #1 cuttings are the fall down out of our clear board program and produce 70% recovery of 1200mm clear cuttings. A perfect grade for taking cut to length clear components. This grade is pith free and has no limitations on size of knot.
Width: 75/100/150/200
Thickness: 25/32/38/50
Length: 1.8 - 6.0m (30cm increments) 2 lengths per pack
Craigpine ACOL is a combination of #3 Cuttings,
#2 Cuttings and better. Each piece shall yield 55% or better recovery of 300mm or longer clear cuttings. This grade is wane and pith-free.
Width: 75/100/150/200
Thickness: 25/32/38/50
Length: 1.8 - 6.0m (30cm increments) 2 lengths per pack
Craigpine Kiln Dried Industrial is a grade permitting any number and combination of defects, provided each piece holds together under normal handling. Pith is permitted.
Width: 75/100/150/200
Thickness: 25/32/38/50
Length: 1.8 - 6.0m (30cm increments) 2 lengths per pack
Craig Pine Green Flitch is taken from the core of the log and contains any number of defects and pith. This product is not Kiln dried, and is anti-sap stain dipped.
Width: 150
Thickness: 100
Length: 3.6 - 6.0m (30cm increments) 1 length per pack